By Brady Betzel
I see a lot of footage from all over the world captured on all sorts of cameras and shot in good and bad lighting conditions. Besides camera types and lenses, proper lighting is consistently an area that needs the most attention.
If you troll around YouTube, you will see all sorts of lighting tutorials (some awful, but some outstanding) — some tutorials offer rundowns on what lighting you can get for your budget, from the clamp-style garage lights with LED bulbs that can be purchased at your local Lowe’s, a standard three-piece lighting kit, or even the ever-trendy Kino Flo lights. There are so many choices it’s hard to know what you should be looking at or even why you are choosing things like LED over tungsten or fluorescent.
In this review, I am going to go over the Zylight IS3/c LED light. The “c” in IS3/c stands for the Chimera softbox, which can be purchased with the light.
Recently, I have really been interested in lighting, and a few months back Zylight sent me the IS3/c to try out. Admittedly, I am not a world-famous DP or photographer with extensive experience in lighting. I know my way around a mid-level lighting setup and can get my way through a decent-looking three-light setup, so my apologies if I don’t touch on the difference between the daylight and tungsten foot candle output. Not that footcandles are not interesting subjects, but those can take a while to figure out and are probably best left to a good Lynda.com tutorial, or better yet a physics class on optics and lighting like the one I took in college.
The Zylight IS3/c comes with the light head itself, Yoke bar with 5/8-inch baby pin-adapter, some knobs and washers, AC adapter and hanging pouch, safety cable, guide and the Chimera softbox (if you purchased the IS3/c package). Before reading the manual, which would have been the proper thing to do, I immediately opened the box and plugged in the light. It lit up the whole interior of my house at night — think Christmas Vacation when Clark plugged in the Christmas lights (good movie). I saw, in one second, how I could immediately paint a wall (or all of my walls) with the IS3.
The beauty of LED lights is that they are typically lightweight and some can reproduce any color you can dream of while staying cool to the touch. So I wanted to see if I could paint a 15-foot wall chromakey green. With little effort I switched into color mode by flipping the rocker switch on the back of the light, turned the Hue knob until I hit green, and adjusted the saturation to 100% to try and literally paint my wall green with light. It was pretty incredible and dead simple.
The IS3 has a 90-degree beam angle on center with a 120-degree beam angle total (I found multiple specs on this like 95/115-degree beam angle, so this is approximate), has a power consumption of 220 watts max, can be purchased in black and white and is made in the USA. The IS3 has two presets for white light and two presets for color. In white mode the IS3 can output any color temperature between 2500K and 10,000K. The Kelvin range is adjusted in 50K steps. Because LEDs are known for giving off a green tint, there is an adjustment knob to lower or raise the green adjustment. There is also a dimmer knob that allows for dimming with little color shift. In color mode, there are three adjustments: hue, saturation and dimming.
One of the big features among IS3 lights, and Zylight lights in general, is the built-in wireless transmitter that can talk to the Zylink bridge and Zylink iOs app. You can link multiple lights together and control them simultaneously. With the iOs app you can set hue values and even color presets like crossfade, strobe, police and flame. You can run the Zylight by either the AC adapter or rechargeable battery. The outside of the light is built sturdy with a rubberized front and a metal back that doubles as heat dissipation as well. In addition to the Zylink wireless connection, you can use the DMX connection to connect to and control the Zylight.
In the end, the Zylight IS3/c is the soft light as well as wall wash light that I’ve been dreaming of. I was even thinking I could use the IS3 as Christmas lights. I could get a couple IS3s to paint the house red and green.
The Zylight is as easy to configure as any light I have ever used; unfortunately the price doesn’t match its ease of use. It’s pricey. The IS3/c is currently listed on Adorama.com for $2,699, and just the IS3 is $2,389. But you get what you pay for — it’s a professional light that will run 50,000 hours without needing calibration, it weighs 11 pounds and measures 18.5” x 10.75” x 1.9” — and you will most likely not need to replace this light.
If you run a stage show and need to control multiple lights with multiple color combinations quickly, the Zylink wireless bridge and iOs app may be just for you.
Brady Betzel is an Emmy-nominated online editor at Margarita Mix in Hollywood, working on Life Below Zero and Cutthroat Kitchen. You can email Brady at email@example.com. Follow him on Twitter @allbetzroff.