By Brady Betzel
Basic color correction is rapidly becoming a skill that is expected of an editor, or even an assistant editor. If you have had the luxury of using a colorist and/or an online editor, you have probably seen them use apps such as Blackmagic Resolve, Avid Symphony, FilmLight’s Baselight or other color grading tools. These systems have so many levels of intricacy that without years of experience in color correction, most editors’ knowledge starts at the beginning stage.
If you are an editor looking to do basic color correction, slight secondary correction and, maybe, even a creative grade, you probably want to stay inside of your NLE, whether it’s Adobe Premiere, Apple FCPX, Avid Media Composer, Magix Vegas, or even After Effects. This is where NewBlueFX’s latest color correction and grading plug-in comes into play.
Featuring over 60 different looks (sometimes referred to as creative LUTs or preset color grades), skin tone isolation and the ability to isolate regions of an image for the video scopes to analyze, New Blue ColorFast 2 is a modest color correction app without the overwhelming toolset of a full-fledged color correction application.
ColorFast 2 costs $99 and works in apps like Vegas Pro 10+, Resolve 11+, Premiere CS6/6.5/CC, After Effects 5+, FCPX, Media Composer/Symphony 6+ and Grass Valley Edius 7 and 8. If you are using apps like Resolve you probably would only use ColorFast 2 for its preset looks since you already have access to all of the color correction tools included in the plug-in — unless you like the region isolating feature for the video scopes, something I find really intriguing.
ColorFast2 RGB Scope and the Lumetri RGB scope.
Most people reading this review will probably want to know why they should buy ColorFast 2 when Premiere Pro has a lot of these features built into their Lumetri color correction tools. To be honest, there are only a few things that ColorFast 2 has that Premiere, or other apps for that matter, don’t have: region-controlled video scopes, skin color isolating and NewBlueFX’s color presets. You should really check out NewBlueFX’s product page for ColorFast 2 to see some more examples of the color presets and download a trial for yourself.
Right off the bat, I felt that stacking ColorFast 2 after the Lumetri color correction tools in the effects panel in Premiere is the proper order of operations. If you are familiar with LUTs and how the chain of command works, you probably have experimented with color correcting before and after the LUT is applied.
Typically, a LUT gives the colorist a good starting point to grade from, but these days you may see creative LUTs. If the creative LUT doesn’t quite look right you will want add color correction first in the chain of command and then the LUT. This is how I would work with ColorFast 2 and Lumetri color correction tools. You will be correcting the footage to work with your creative LUT instead of correcting the LUT, which most of the time will give you inadequate results. Long story short: stack your ColorFast 2 effect after Lumetri tools in the effects window and then fine-tune the Basic Correction settings with your ColorFast 2 preset to get a great color grade.
The ColorFast2 waveform with isolated scope region.
I was excited to check out the video scopes inside of ColorFast 2, so I jumped to the bottom where the Region Scopes twirl-down menu is. Under that is the Video Scopes menu, which contains Vectorscope (Classic), Vectorscope (Color), Vectorscope (Sat, RGB Parade), Waveform and Histogram. The real beauty is that NewBlueFX gives you the ability to isolate a square region of your footage to be output through the video scope. This allows you to pinpoint your correction a little easier, and I really love this feature… but I also noticed that when you have both the Lumetri video scopes, as well as the ColorFast 2 scopes there is a discrepancy in values. I tended to like the Lumetri video scopes a little better. In fact, they go all the way up to 100, where the ColorFast 2 scopes only go up to 80 — this could very well be a bug in the compatibility between ColorFast 2 and the new Adobe Premiere CC 2015.4.
One issue I found with the ColorFast 2 scopes was that I couldn’t move the actual scope around or have more than one on at a time. While the region selection is an awesome feature, being able to see your full image is sometimes more important, so that is why I would probably stick to the NLEs built-in scopes.
Primary, Secondary, Output Correction Menus
Going back to the top of the ColorFast 2 Effect Editor menus, up first is the Primary Correction twirl-down menu. Here you can quickly white-balance your footage with an eyedropper, even keyframe it. In addition, you can adjust the White Strength, White Tweak (fine-tune control of the white color), Hue, Saturation, Exposure, Brightness and Film Gamma. A problem I encountered was that if you do a primary color correct on your image and then choose a color preset, all of your primary work gets reset, which is a real bummer if you want to correct and then grade your footage. So, if you want to work in ColorFast 2 in a more traditional way, where you color correct then color grade, you may want to do it in two separate effects. Moreover, you may want to primary color correct inside of the Lumetri tools then stack the ColorFast 2 on top.
Next up is the Secondary Correction twirl-down menu, which gets you into the real meat and potatoes of the plug-in. There is a helpful “Show Mask” drop down that will allow you to isolate and view Highlights, Midtones, Shadows, Skin Color Mask and a Shape Mask. Inside each of these you can adjust Tint, Saturation, overall Level, and even enable and disable this secondary if you want. Further down in the secondary menu you can adjust the High, Mid and Shadow thresholds (basically transitions from high to mid or mid to shadow), and even the blending and spread.
While still in the secondary twirl-down menu you can jump into the Skin Mask, which will quickly help you identify skin color, soften imperfections and even help keep skin color fidelity while adjusting the rest of your image.
The last menu is the Output Correction twirl-down. Here you can do a widespread correction that lands after the fine-tuning. You can adjust overall Saturation, Exposure and Brightness.
In the end, I think ColorFast 2 is best suited for people who want a quick color grade by applying a preset look but who also want a little ability to fine-tune that look. ColorFast 2 has some pretty good-looking presets like Vintage, Fallout, Gotham and even some black and white presets like B&W Ink. It’s even more fun to go and purposely change your white balance to something crazy, like a deep purple, for interesting grades. You should definitely try NewBlueFX’s ColorFast 2 if you are looking for some additional creative grade looks while still being able to individually tweak the output.
Brady Betzel is an Emmy-nominated online editor at Margarita Mix in Hollywood, working on Life Below Zero and Cutthroat Kitchen. You can email Brady at firstname.lastname@example.org. Follow him on Twitter @allbetzroff.